Rear Shelf Aerobar Pad Cups (Set of 2)

$85 (shipping is free in the USA with $20 shipping outside of the USA)

The 'GENERIC'  RH and LH cups are 130mm long X 130mm wide X 45mm high.  I can trim to any size smaller then what is shown, just let me know.

Product Overview

  • If you are trying to find the perfect position for your arms when in the aerobars, these rear shelf aerobar pad cups might be able to help you out.

  • Low weight of ~75 - 90 grams (width dependent)

  • 100% all carbon fiber.  2.5mm thick plain weave pattern. Produced with 14 layers of carbon fiber for a high strength component.

  • These are a semi-custom product where you drill your mounting holes to match your aerobar system setup.  We can put mounting holes in these cups with dimensions supplied.

NOTE: For ordering, the information I need to meet your needs are shown in the drawing below.  The drawing below is the maximum size I can make as the part comes out of the mold and can be made smaller. The drawing represents the 'GENERIC' size and will be the supplied size if no other dimensions are given.

If you could supply me with the 'A', 'B', and 'C' dimensions, I can get you the size you need.

 

These will come with no mounting holes, but if you supply me with the dimensions I can put these in as well.

IMG_3730.JPG
IMG_3727.JPG
IMG_3733.JPG
IMG_3724.JPG
IMG_3729.JPG

If you could supply me with the 'A', 'B', and 'C' dimensions, I can get you the size you need.

cup-blank.jpg

This is the maximum blank size out of my forming mold

Below is the maximum blank size out of my forming mold.  From this blank you can trim to any smaller size needed.

$70 (shipping is free in the USA with $20 shipping outside of the USA)

Alden Carbon LLC
Seymour, IN. USA

All our products are designed and produced in the USA by us in our small shop

Website content updated: 09/29/19